Screen printing clamps usage: this product is used for fixing screen plate when printing, can be fixed to any console, you can also make your own operating station, easy to operate.
It can be used for making simple handprint table, one pair is available for the small screen and several pairs for the large screen, made of galvanized material.
|Name||Butterfly Frame Hinge Clamp|
|Material||Alloy & Iron|
|Mainly used to fix the screen printing screen frame, so that the screen frame can be better raised and lowered|
Can clamp max 4.5 cm thick screen, manual measurement will have some errors,please refer to the actual product received.
- Take a flat board and draw a straight line on a section of the board.
- Take two points on the straight line, install screen printing clamps, and install one pair or several pairs in parallel as needed.
- Install the screen, align the printing position, lock the chuck, flip the screen up and down, it can be used flexibly and without obstruction.
- Durability and Solidity, Commonly Used In Manual Screen Printing.
- High-quality stainless steel, anticorrosion,Resistant to fresh water, Non-defrmation,resistant to rust.
- Easy disassembly, easy to reuse.
Frequently Asked Questions
- Is the product the price of a single product or the price of a paired product?
The price marked on the page is the price of the paired product.
- What should I pay attention to when choosing a screen printing clamps?
It is necessary to measure the thickness of the screen frame, because the screen printing
clamps can clamp max 4.5 cm thick screen frame, if it exceeds this thickness, it may not be
able to hold it.
- How long is your delivery time?
Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not
in stock, it is according to quantity.
Next: Plastic ink spatulas