5 Micron nylon filter mesh | Professional Mesh Manufacturer - Macrokun mesh supplier

5 Micron nylon filter mesh

Resistant to common solvents and to alkalies but are attacked by strong mineral acids.
Good abrasion resistance and low coefficient of friction.
Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).
Water absorption is very high.
Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed.

Technical Information:
Mesh Opening: 5 micron
Open Area: 1 %
Thread Diameter: 37 micron
Thickness: 100 micron
Width: 1m
Length: 30m or 50m per roll, or as request.

Material: Nylon
Stability to light: Poor
Abrasion resistance: Good
Acid resistance: Limited-Poor
Alkaline resistance: Good
Stability to solvents: Limited
Hydrolysis resistance: Good

Applications
– Paint
– Process water filtration
– Plating solutions
– Coatings
– Lubricants
– Coolants
– Solvents
– Hydraulic fluids
– Cutting fluids
– Ground water remediation
– Industrial waste water treatment

    Get Best Quote

    If you want to buy our products, You Can Cantact With Us, We Offer You Many Contacts, Such As, Telephone, Email, Consulting Online Or Leave Messages. You Can Contact With Us In Your Own Way.


    Pre:

    Next:

    Online Quote Form

    Complete the form below and we will get back to you as soon as possible.

    • Quote Information:

    Online Quote Form

    Complete the form below and we will get back to you as soon as possible.

    Subject: » 5 Micron nylon filter mesh
    • Quote Information:

    Subscribe Form

    Subject: » 5 Micron nylon filter mesh