02-25-21

» 60/70/80duro Polyurethane Screen Printing Squeegee Polyurethane Squeegee Rubber

Squeegee is the glue strip used in the screen printing process. Most of them are made of PU material. According to the characteristics of the screen printing substrate, the precision requirements of the printing pattern and the different printing methods, squeegee with different hardness and cross-sectional shape can be selected.

Product name: screen printing squeegee Brand: MACROKUN
Material: Polyurethane Length: 3660mm/roll,4000mm/roll,customized
Size: 25*5mm, 35*7mm, 50*9mm Color: red, green, blue, white,

etc,customized

Strip hardness: 55,60,65,70,75,80,85,90,95A Blade shape: flat, sharp, oblique, blunt
Product use: Make glue or ink flow through the screen to contact the substrate material,
ensure that the screen is suitable for the surface of the substrate, and can remove excess glue and ink on the screen
Storage method: After using up or not using for a long time, the blade should be cleaned with water or net water.Wash it clean and keep it in a cool place to extend the life of the tape

Welcome to buy the screen printing squeegee produced by MACROKUN, our screen printing

squeegee has a variety of sizes and hardness for your choice!

  PU100 PU300 PU500 PU800 Triple Layer ±Tolerance
Thickness 2-20mm ±0.3mm
Width 9-500mm ±1.00mm
Length 10-4000mm ±5mm
Hardness 55-95 Shore A ±3A

MK-PU100
Usage : Widely used in t-shirt,textiles printing etc.
Feature : Resistant to water-based inks and common solvents.

MK-PU300
Standard References :  Soft 65sh A red / Medium 75shA green
Usage : Widely used in UV inks,CD/DVD,disc,glass,ceramic,package,PCB printing etc.
Feature : It is and all purpose polyurethane blade with good combined resistance to chemicals  and abrasion.it was developed to withstand various applications in screen printing.

MK-PU500
Standard References :  Soft 65sh A red / Medium 75shA green
Usage : Widely used in PCB,Solar panel,touch screen,glass,decal paper printing etc.
Feature : It is a special polyurethane blade with excellent combined resistance to chemicals and abrasion.It was developed to withstand the toughest applications in screen printing and to have a long shelf life in most environments,sharpens well.

MK-PU800
Storage of squeegee : Squeegee need to be put in dry and cool warehouse for long time storage.Newly purchased squeegees,you’d better rotate to use it ,after daily use,just clean the solvent on the squeegee surface,keep the squeegee edge upward.
Usage : Widely used in UV inks,glass,ceramic,PCB and electronics printing etc.
Feature : Raw material from Taiwan,super solvent resistant, abrasion resistant,longer service life,anti-static.

Triple Layer
Triple soft 65/90/65 shore A Red/White/Red Advantages.
Good resistance to chemicals & abrasion.
Resistance to abrasion.
Sharpens easy.
Color coded for easy identification.
High environment stability.
Individual package and batch Applications

Standard Hardness
Soft 55,60,65 Shore A red or natural
Medium 70,75 Shore A green or natural
Hard 80,85 Shore A blue or natural
Super hard 90,95, Shore A white
Triple medium 75/90/75 Shore A green/white/green
Triple soft 65/90/65 Shore A red/white/red

Other hardness and colors are available on request!

Made of special polyurethane elastomer high-quality material, suitable for all kinds of screen printing machines, such as: manual screen printing machine and automatic screen printing machine.

The flat-mouth squeegee has a certain adaptability and can withstand higher pressure.

The inclined squeegee has the characteristics of flat scraping and sharp scraping, and it is not easy to collapse.

The sharp-edged squeegee has good flexibility, compliance, reduces pressure, and is suitable for printing on uneven surfaces.

The larger the degree of the strip, the harder the squeegee, and the smaller the degree, the softer the squeegee.

Product Features:

1.High abrasion and tear resistance resulting in better elasticity.

2.Excellent resistance and minimum swell to a wide range of pastes,inks and solvents.

3.Precisely finished edge.

4.Hyper solvent resistance.

5.Has good abrasion resistance, can be repaired with a scraper.

The screen printing squeegee is melted and cast by a centrifuge. This fully computer-controlled process not only.

It can avoid the generation of air bubbles and small holes, and it is the only way to ensure the quality of squeegee from beginning to end.

Consistent advanced technology. In addition, each squeegee needs to be tested and sold before leaving the factory, which effectively avoids being unusable due to the appearance of air bubbles and pinholes.

Use Suggested:

When using, try to avoid excessive pressure of the scraper on the screen, which will cause: the ink layer is extremely thick, difficult to control, and will also wear the screen excessively. printing with proper pressure. When loading the squeegee into the handle, do not apply excessive pressure or use a thick gauge to press it in, the squeegee should take regular breaks, not continuous use.

Cleaning Method:

Wipe off excess ink with a cloth first, and then use a soft cloth dipped in a suitable solution to clean it. Do not use strong corrosive solvents. After grinding, the spatula should be completely idle before use to allow the solvent on the spatula to fully evaporate.

Grinding Method:

Common grinding methods can be used: belt type, grinding wheel type. The squeegee must be kept dry during grinding, and the squeegee after grinding should not be wiped with solvent immediately.

Storage Method:

For long-term storage, the squeegee should be wrapped and placed flat in a dry, cool and dark room. Avoid direct light exposure, otherwise the performance and hardness of the scraper will change.

Product packaging is divided into two types:

1.Carton packaging, suitable for small volume and small quantity.

2.Packed in paper tube drum, suitable for large volume and large quantity of goods.

Transport:

1.Samples orders usually within 3 days shipped by Courier (DHL, TNT, FEDEX, UPS, EMS and

so on).

2.Small quantity orders usually within 3-7 days shipped by air or by sea.

3.Large quantity orders usually within 7-15 days shipped by sea.

The main export port: SHENZHEN.

 

FAQ

1.Q: How fast can I get the quotation?
A: We usually quote within 12 hours unless holiday in China, if you can urgent to get the price, you can call us so that we
can regard your inquiry priority.

2.Q: Can I get the samples?
A: yes. The sample can be free of charge. But, the shipping expenses should be paid by the customer. The sample will be issued within 3 days. Custom samples take more time.

3.Q: How long does the production take?

A: Usually the delivery time is 1-10 days after confirming order and detail. Delivery time depending on your purchasing
quantity and production season.

4.Q: Can the logo or company name to be printed on the products or package?
A: Sure. We are able to make your brand label and color box as your requirements. Please contact us to discuss details.

5.Q: What is your payment term?
A: Our normal payment is T/T 100% deposit, PayPal, Western Union.

6.Q: How does your factory do regarding quality control?

A: Quality is priority. We will do 100% quality inspection before shipment.

7.Q: Can you produce according to customers’ design?
A: Sure, we are professional manufacturer, OEM and ODM are both welcome.

 

    Table of Contents

    Get Best Quote

    If you want to buy our products, You Can Cantact With Us, We Offer You Many Contacts, Such As, Telephone, Email, Consulting Online Or Leave Messages. You Can Contact With Us In Your Own Way.


    Pre:

    Next:

    Tell us what you need, and we'll help you get quotes

    MACROKUN has established long-term and stable cooperative relations with many transportation companies such as China Post, DHL, FEDEX, USPS, UPS, etc. Of course, MACROKUN can also provide air and sea transportation. The powerful logistics system enables all MACROKUN'S Printing Mesh, Filter Mesh and Filter Bags and so on to be easily and efficiently transported to any place. For quotes and inquiries, please email our sales team.

    TOP