08-10-21

» 100% Polyester screen printing mesh

PRODUCTS INFORMATION

Product Name: Screen printing  mesh

Meterial: 100% polyester monofilament

Width: 0.6-3.65 Meters

Mesh count:  6T to 180T(15mesh to 460mesh/inch)

Color: white and yellow or customized Roll length

30-100m or customized

High Tension: The fracture resistance is high, and the tension value of the printing mesh is significantly higher than that of the ordinary printing mesh.

High Stability: The tension remains very stable during the printing process, thus ensuring the printing quality and the service life of the screen.

High abrasion resistance: The high-quality fiber is used as the raw material, and the surface of the screen is specially treated to withstand high pressure and multiple frictions.

Therefore, the screen has high safety and printing resistance.

[Our Advantage]

1. 126 sets P7100 and P7150 Sulzer weaving looms  from Switzerland, as well as Germany-made intellectual electronic warping machine can ensure our supply ability to be 5000 meters per day.

2. For normal mesh count mesh and other products, usually we have stocks, goods can be shiped out within 15 days.

3. Our production process fully based on the high computer technology, it is accepted as the only company capable of having TSE ( Chinese Standard Institution ) and ISO 9001:2008. 90% of our silk screen printing mesh exported to Southeast Asia, North America, Europe and other parts in the world.

We have good reputation in the world with high quality and competitive price.

[White and Yellow color mesh differences]

White mesh is the more economical of the two, and is primarily seen in lower mesh counts used for less-detailed designs. Higher count mesh is usually dyed yellow because the color yellow acts as a canceling factor for UV light and prevents refraction along the mesh strands when burning your screens. This allows for a more focused and precise exposure, keeping your screens as crisp as possible.

 

[Production Process]

Buy yarn from Jintong, Switzerland and Japan, we inspect the yarn when they unloaded in our factory. (tolerance, tensile strength, physics test etc.).

After that, we put the warp wire on beam, draw the warp wire into heddle and reed. Then our

experienced weaver will start weaving according to orders.

Initial survey will be done after weaving.Then start heat setting treatment and physical properties

inspection, before we get tentative finished rolls(60-500 meters big rolls).

In the end, we’ll cut the small rolls(20m-50m) according to customer orders after a final inspection.

Pre: Platen Paper

Next: Corn Fiber Triangle Tea Bag